BIG RIP (6.5 Horse Power)
BIG RIP (6.5 Horse Power)
BIG RIP (6.5 Horse Power)
BIG RIP (6.5 Horse Power)
BIG RIP (6.5 Horse Power)
BIG RIP (6.5 Horse Power)
BIG RIP (6.5 Horse Power)
BIG RIP (6.5 Horse Power)
BIG RIP (6.5 Horse Power)
BIG RIP (6.5 Horse Power)
BIG RIP (6.5 Horse Power)
BIG RIP (6.5 Horse Power)
BIG RIP (6.5 Horse Power)
BIG RIP (6.5 Horse Power)
BIG RIP (6.5 Horse Power)
BIG RIP (6.5 Horse Power)
BIG RIP (6.5 Horse Power)
BIG RIP (6.5 Horse Power)
BIG RIP (6.5 Horse Power)
BIG RIP (6.5 Horse Power)
BIG RIP (6.5 Horse Power)
BIG RIP (6.5 Horse Power)
BIG RIP (6.5 Horse Power)

BIG RIP (6.5 Horse Power)

Regular price $1,799.99 Sale

***FREE SHIPPING ON ALL PRODUCTS***

!!Pre-Order Sale!!

Discount Applied At Checkout

10% Off Big Rip until 8/31/20

Product Ships by 9/30/20

 

"The Ice Ripper Is A Priceless Tool When Your Favorite Hole Is Covered In 1"-8" Ice!!" BIG RIP takes that to a whole new level!! By far the most powerful and versatile Pond Heater on the market. 

The Big Rip is a De-Icing machine that is portable, giving the user the ability to unfreeze bodies of water at any given location.

6.5 times the power, 4 times the water movement, 2 times faster than any De-Icing unit on the market!!

BIG RIP Comes in 2 separate models.

Land Model

The Land Model is our Base model. The 6.5hp Vanguard engine is encased in a small frame and is designed to be sat on dry land or platform that keeps it out of the water. It can be hooked up to any Aux. fuel cell with a 1/4" female npt. port (3gal, 6gal, 20gal, etc. Tank not included). From the motor assembly attaches a removable 20 foot flexible drive shaft. With a quick turn of the coupler ring, the shaft is easily disconnected from the engine. The 20ft drive shaft runs out to The standard Ice Ripper Frame. Once at the frame, the shaft turns a prop to circulate the water hence melting or keeping the ice from forming just like a standard Ice Ripper.   

  • 6.5 Horse Power Vanguard Motor
  • 20ft Flexible Drive Shaft 
  • Motor Frame Size is 18"x18"x18"
  • 1 gallon tank on top of the motor
  • Fuel Pump with 3 feet of 1/4" fuel line attached to the engine.
  • Quick connect on the end of the fuel line,  attach to any aux. fuel cell with 1/4" female npt fitting 
  • AUX. fuel cell not included
  • 2 spud poles 4 feet long are provided. Due to the enormous power of this unit it requires the frame to be staked down to the ground to keep it from flipping over. 
  •  1.84 hours run time, per gallon at FULL THROTTLE
  • 4 hours run time, per gallon at HALF THROTTLE
  • Durable Aluminum Propeller
  • Fully Adjustable Powder Coated Frame
  • 3 Built In Handles For Easier Carrying
  • Removal Of The Logo Plate Allows For Easier Access To The Prop If a Broken Prop Should Occur
  • 3 year commercial warranty on the engine, serviceable at any Briggs & Stratton Warranty dealer.
  • 2 year warranty on the flexible drive shaft.
  • limited lifetime warranty on the Cage, and Stand, 
  • Lifetime warranty on the prop. Send the main portion back and we will replace it at no cost. Just pay the shipping cost.
  • Effective Working Depth From 1' to 8' deep while on the stand (Ice Ripper Can Be Hung From Docks or Poles With the Provided Eye bolts
  • Normal Conditions Will Yield A 40 x 80 yard Hole bigger if put in the water before the water freezes (please allow ample run time to acquire desired results)
  • Patent Pending

     

    Floating Model

    The Floating Model is our most versatile model. The 6.5hp Vanguard engine is sitting on a 35 inch round float. The float houses 11 gallons of fuel. the float can be spud poled to the ground keeping it in one place. From the motor attaches a removable 20 foot flexible drive shaft. With a quick turn of the coupler ring, the shaft is easily disconnected from the engine. The 20ft drive shaft runs out to The standard Ice Ripper Frame, once at the frame the shaft turns a prop to circulate the water hence melting or keeping the ice from forming just like a standard Ice Ripper.   

    • 6.5 Horse Power Vanguard Motor
    • 20ft Flexible Drive Shaft 
    • Float Size is 35"x35"x28" with the motor height included.
    • 1 gallon tank on top of the motor
    • 11 gallon tank inside the float.
    • Fuel Pump attached to the engine.
    • 1 spud pole 5 feet long is provided to spud the float in one place. 
    • 2 spud poles 4 feet long are provided. Due to the enormous power of this unit it requires the frame to be staked down to the ground to keep it from flipping over. 
    •  1.84 hours run time, per gallon at FULL THROTTLE (22 Hours Total Per Fill Up)
    • 4 hours run time, per gallon at HALF THROTTLE (48 Hours Total Per Fill Up)
    • Durable Aluminum Propeller
    • Fully Adjustable Powder Coated Frame
    • 3 Built In Handles For Easier Carrying
    • Removal Of The Logo Plate Allows For Easier Access To The Prop If a Broken Prop Should Occur
    • 3 year commercial warranty on the engine, serviceable at any Briggs & Stratton Warranty dealer.
    • 2 year warranty on the flexible drive shaft.
    • limited lifetime warranty on the Cage, and Stand, 
    • Lifetime warranty on the prop. Send the main portion back and we will replace it at no cost. Just pay the shipping cost.
    • Effective Working Depth From 1' to 8' deep while on the stand (Ice Ripper Can Be Hung From Docks or Poles With the Provided Eye bolts
    • Normal Conditions Will Yield A 40 x 80 yard Hole bigger if put in the water before the water freezes (please allow ample run time to acquire desired results)
    • Patent Pending

                      

     

     

     

     

      !!WARNING!!

    • Always keep all children and animals away from this product.
    • Stay out of the water while unit is running.
    • Give the unit time to completely shut off before attempting to collect unit from water.
    • J2 Outdoors is not responsible for any damages caused by improper assembly or usage.
    • J2 Outdoors is not responsible for any damage or accidents this product may cause. Always use with caution.
    • Always keep all loose clothing items and hands away from the propeller.
    • This unit circulates massive amount of water and can mess with the oxygen levels in ponds. If you plan to use in a stocked pond take the precaution to slowly circulate the water before the season hits. No more then 30 minutes a day for a least a week. If you use the product without taking these precautions it could put fish in a state of shock due to the lower oxygen getting moved to the surface. J2 Outdoors is not responsible for any results caused by these steps not being followed.